Datasheet Texas Instruments OPA843IDBVTG4 — Datenblatt

HerstellerTexas Instruments
SerieOPA843
ArtikelnummerOPA843IDBVTG4
Datasheet Texas Instruments OPA843IDBVTG4

Breitband-Operationsverstärker mit geringer Verzerrung, mittlerer Verstärkung und Spannungsrückkopplung 5-SOT-23 -40 bis 85

Datenblätter

Wideband, Low Distortion, Medium Gain, Voltage-Feedback Operational Amp datasheet
PDF, 855 Kb, Revision: C, Datei veröffentlicht: Dec 30, 2008
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Verpackung

Pin5
Package TypeDBV
Industry STD TermSOT-23
JEDEC CodeR-PDSO-G
Package QTY250
CarrierSMALL T&R
Device MarkingOARI
Width (mm)1.6
Length (mm)2.9
Thickness (mm)1.2
Pitch (mm).95
Max Height (mm)1.45
Mechanical DataHerunterladen

Parameter

2nd Harmonic76 dBc
3rd Harmonic102 dBc
@ MHz5
Acl, min spec gain3 V/V
Additional FeaturesDecompensated
ArchitectureBipolar,Voltage FB
BW @ Acl500 MHz
CMRR(Min)85 dB
CMRR(Typ)95 dB
GBW(Typ)1500 MHz
Input Bias Current(Max)35000000 pA
Iq per channel(Max)20.8 mA
Iq per channel(Typ)20.2 mA
Number of Channels1
Offset Drift(Typ)4 uV/C
Operating Temperature Range-40 to 85 C
Output Current(Typ)100 mA
Package GroupSOT-23
Package Size: mm2:W x L5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG
Rail-to-RailNo
RatingCatalog
Slew Rate(Typ)1000 V/us
Total Supply Voltage(Max)12 +5V=5, +/-5V=10
Total Supply Voltage(Min)8 +5V=5, +/-5V=10
Vn at 1kHz(Typ)2 nV/rtHz
Vn at Flatband(Typ)2 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)1.2 mV

Öko-Plan

RoHSCompliant

Design Kits und Evaluierungsmodule

  • Evaluation Modules & Boards: DEM-OPA-ADS-SO-1A
    DEM-OPA-ADS-SO-1A
    Lifecycle Status: Preview (Device has been announced but is not in production. Samples may or may not be available)
  • Evaluation Modules & Boards: DEM-OPA-SOT-1A
    Unpopulated PCB Compatible w/High Speed, Wide Bandwidth Op Amps in SOT(DBV) Pkg
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: DEM-OPA-SO-1A
    DEM-OPA-SO-1A Unpopulated PCB Compatible w/High Speed Wide Bandwidth Op Amps in 8-lead SOIC (D) Pkg
    Lifecycle Status: Active (Recommended for new designs)

Anwendungshinweise

  • Using a decompensated op amp for improved performance
    PDF, 352 Kb, Datei veröffentlicht: Mar 11, 2005
  • RLC Filter Design for ADC Interface Applications (Rev. A)
    PDF, 299 Kb, Revision: A, Datei veröffentlicht: May 13, 2015
    As high performance Analog-to-Digital Converters (ADCs) continue to improve in their performance, the last stage interface from the final amplifier into the converter inputs becomes a critical element in the system design if the full converter dynamic range is desired. This application note describes the performance and design equations for a simple passive 2nd-order filter used successfully in AD
  • ADS5500, OPA695: PC Board Layout for Low Distortion High-Speed ADC Drivers
    PDF, 273 Kb, Datei veröffentlicht: Apr 22, 2004
    Once an analog-to-digital converter (ADC) and a driver/interface have been selected for a given application, the next step to achieving excellent performance is laying out the printed circuit board (PCB) that will support the application. This application report describes several techniques for optimizing a high-speed, 14-bit performance, differential driver PCB layout using a wideband operation
  • Measuring Board Parasitics in High-Speed Analog Design
    PDF, 134 Kb, Datei veröffentlicht: Jul 7, 2003
    Successful circuit designs using high-speed amplifiers can depend upon understanding and identifying parasitic PCB components. Simulating a design while including PCB parasitics can protect against unpleasant production surprises. This application report discusses an easy method for measuring parasitic components in a prototype or final PC board design by using a standard oscilloscope and low freq
  • Noise Analysis for High Speed Op Amps (Rev. A)
    PDF, 256 Kb, Revision: A, Datei veröffentlicht: Jan 17, 2005
    As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

Modellreihe

Herstellerklassifikation

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)