Datasheet Texas Instruments TPS5430DDAG4 — Datenblatt

HerstellerTexas Instruments
SerieTPS5430
ArtikelnummerTPS5430DDAG4
Datasheet Texas Instruments TPS5430DDAG4

5,5 V bis 36 V Eingang, 3A, 500 kHz Abwärtswandler 8-SO PowerPAD -40 bis 125

Datenblätter

TPS543x 3-A, Wide Input Range, Step-Down Converter datasheet
PDF, 1.1 Mb, Revision: I, Datei veröffentlicht: Mar 22, 2017
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Verpackung

Pin8
Package TypeDDA
Industry STD TermHSOIC
JEDEC CodeR-PDSO-G
Package QTY75
CarrierTUBE
Device Marking5430
Width (mm)3.9
Length (mm)4.89
Thickness (mm)1.48
Pitch (mm)1.27
Max Height (mm)1.7
Mechanical DataHerunterladen

Parameter

Control ModeVoltage Mode
Duty Cycle(Max)87 %
Iout(Max)3 A
Iq(Typ)3 mA
Operating Temperature Range-40 to 125 C
Package GroupSO PowerPAD
RatingCatalog
Regulated Outputs1
Special FeaturesEnable
Switching Frequency(Max)500 kHz
Switching Frequency(Min)500 kHz
TypeConverter
Vin(Max)36 V
Vin(Min)5.5 V
Vout(Max)31 V
Vout(Min)1.23 V

Öko-Plan

RoHSCompliant

Design Kits und Evaluierungsmodule

  • Evaluation Modules & Boards: TPS5430EVM-173
    TPS5430 35V Input, 5V Output, 3A Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: TPS5430EVM-342
    TPS5430EVM-342 2.25A Inverting Buck Boost Regulator Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: TPS5431EVM-173
    9V to 21Vin, 3A Step Down Converter
    Lifecycle Status: Active (Recommended for new designs)

Anwendungshinweise

  • Using a buck converter in an inverting buck-boost topology
    PDF, 190 Kb, Datei veröffentlicht: Oct 12, 2007
  • Simplifying Stability Checks (Rev. B)
    PDF, 489 Kb, Revision: B, Datei veröffentlicht: Nov 5, 2013
  • Using the TPS5430 As An Inverting Buck Boost Converter (Rev. A)
    PDF, 266 Kb, Revision: A, Datei veröffentlicht: Aug 15, 2007
    The wide input voltage range SWIFTв„ў dc/dc converters are used typically as step-down converters where the derived output is a positive voltage less than the input voltage source. In some cases, it may be required to generate a negative voltage from the input voltage source. In such instances, it is possible to configure the TPS5430/20/10 devices in an inverting buck-boost topology, where the outpu
  • Using TPS5410/20/30/31/50 w/Aluminum/Ceramic Output Capacitors (Rev. C)
    PDF, 392 Kb, Revision: C, Datei veröffentlicht: Mar 21, 2007
    As internally compensated devices, the wide input step-down SWIFTв„ў DC/DC converters, including TPS5410/5420/5430/5431/5450, have the advantages of less external part count and reduced design complexity, as well as limited output capacitor selection. By adding only two or three external components into the standard circuitry, these devices generally work well with aluminum/ceramic output capacitors
  • Q4 2007 Issue Analog Applications Journal (Rev. A)
    PDF, 316 Kb, Revision: A, Datei veröffentlicht: Nov 14, 2007

Modellreihe

Serie: TPS5430 (4)

Herstellerklassifikation

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)