Datasheet Texas Instruments INA155EA/250 — Datenblatt

В® INA155 INA 155 INA 155 For most current data sheet and other product
information, visit www.burr-brown.com Single-Supply, Rail-to-Rail Output, CMOS
INSTRUMENTATION AMPLIFIER
FEATURES APPLICATIONS в—Џ RAIL-TO-RAIL OUTPUT SWING: Within 10mV в—Џ INDUSTRIAL SENSOR AMPLIFIERS
Bridge, RTD, Thermocouple, Flow, Position в—Џ LOW OFFSET VOLTAGE: В±200ВµV
в—Џ LOW OFFSET DRIFT: В±5ВµV/В°C в—Џ MEDICAL EQUIPMENT
ECG, EEG, EMG Amplifiers в—Џ INTERNAL FIXED GAIN = 10V/V OR 50V/V
в—Џ SPECIFIED TEMPERATURE RANGE:
–55°C to +125°C ● DRIVING A/D CONVERTERS
в—Џ PCMCIA CARDS в—Џ LOW INPUT BIAS CURRENT: 0.2pA
в—Џ WIDE BANDWIDTH: 550kHz in G = 10 в—Џ AUDIO PROCESSING
в—Џ COMMUNICATIONS в—Џ HIGH SLEW RATE: 6.5V/Вµs
в—Џ LOW COST в—Џ TEST EQUIPMENT
в—Џ LOW COST AUTOMOTIVE INSTRUMENTATION в—Џ SO-8 AND TINY MSOP-8 PACKAGES DESCRIPTION
The INA155 is a low-cost CMOS instrumentation
amplifier with rail-to-rail output swing optimized for
low voltage, single-supply operation. Gain can be set to 10V/V or 50V/V by pin strapping.
Gains between these two values can be obtained with
the addition of a single resistor. The INA155 is fully
specified over the supply range of +2.7 to +5.5V. Wide bandwidth (550kHz in G = 10) and high slew
rate (6.5V/Вµs) make the INA155 suitable for driving
sampling A/D converters as well as general purpose
and audio applications. Fast settling time allows use …