Datasheet Texas Instruments LPV801DBVR — Datenblatt
| Hersteller | Texas Instruments |
| Serie | LPV801 |
| Artikelnummer | LPV801DBVR |
Einkanaliger 450nA Nanopower Operationsverstärker 5-SOT-23 -40 bis 125
Datenblätter
LPV801/LPV802 320 nA Nanopower Operational Amplifiers datasheet
PDF, 1.3 Mb, Revision: B, Datei veröffentlicht: Nov 16, 2016
Auszug aus dem Dokument
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 5 |
| Package Type | DBV |
| Industry STD Term | SOT-23 |
| JEDEC Code | R-PDSO-G |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | 15VM |
| Width (mm) | 1.6 |
| Length (mm) | 2.9 |
| Thickness (mm) | 1.2 |
| Pitch (mm) | .95 |
| Max Height (mm) | 1.45 |
| Mechanical Data | Herunterladen |
Parameter
| Additional Features | EMI Hardened |
| Architecture | CMOS |
| CMRR(Min) | 80 dB |
| CMRR(Typ) | 98 dB |
| GBW(Typ) | 0.008 MHz |
| Iq per channel(Max) | 0.00054 mA |
| Iq per channel(Typ) | 0.00045 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 1.5 uV/C |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 4.7 mA |
| Package Group | SOT-23 |
| Package Size: mm2:W x L | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
| Rail-to-Rail | In to V-,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 0.0018 V/us |
| Total Supply Voltage(Max) | 5.5 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 1.6 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 420 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 3.5 mV |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: DIP-ADAPTER-EVM
DIP Adapter Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- LPV801 Micropower Ionization Smoke DetectorPDF, 127 Kb, Datei veröffentlicht: Nov 29, 2016
Ionizationdetectors,as usedin smokealarms,outputa very low currentthat requiresa bufferamplifiertointerfaceto the alarmcircuitry.Thisrequiresa bufferamplifierwith low inputbiascurrent,and,sinceasmokedetectoris a always-on device,the amplifiermustalsohavea verylow quiescentcurrenttomaximizethe batterylife. Thisapplicati - Comparing EMI Performance of LPV802 with Other Devices in a Gas Sensor AppPDF, 4.0 Mb, Datei veröffentlicht: Oct 18, 2016
Passing the IEC61000-4-3 Radiated EMI test is a requirement for preparing a product for many industrial,medical and consumer markets. This application note presents the results of a simple comparison of theLPV802 nanopower operational amplifier and two other competing devices in a Carbon Monoxide gassensor circuit while subjected to IEC61000-4-3 EMC test conditions. - Extend Battery Life and Simplify Calibration in Gas Sensing ApplicationsPDF, 140 Kb, Datei veröffentlicht: Sep 22, 2017
- Precision Voltage Offset: When Does it Matter? (Rev. A)PDF, 271 Kb, Revision: A, Datei veröffentlicht: Nov 2, 2016
Modellreihe
Serie: LPV801 (3)
- LPV801DBVR LPV801DBVT PLPV801DBVT
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Ultra-Low-Power Op Amps (<=10uA)