Datasheet Texas Instruments REG710NA-2.5/250 — Datenblatt

HerstellerTexas Instruments
SerieREG710-25
ArtikelnummerREG710NA-2.5/250
Datasheet Texas Instruments REG710NA-2.5/250

30-mA-DC / DC-Wandler mit Schaltkappe und festem 2,5-V-Ausgang 6-SOT-23 -40 bis 85

Datenblätter

REG710xx Buck-Boost Charge Pump with up to 60-mA Output Current datasheet
PDF, 1.2 Mb, Revision: H, Datei veröffentlicht: Oct 30, 2015
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Verpackung

Pin6
Package TypeDBV
Industry STD TermSOT-23
JEDEC CodeR-PDSO-G
Package QTY250
CarrierSMALL T&R
Device MarkingR10G
Width (mm)1.6
Length (mm)2.9
Thickness (mm)1.2
Pitch (mm).95
Max Height (mm)1.45
Mechanical DataHerunterladen

Parameter

Iout(Max)0.03 A
Iq(Typ)0.065 mA
Operating Temperature Range-40 to 85 C
Package GroupSOT-23
RatingCatalog
Special FeaturesEnable
Switching Frequency(Max)1000 kHz
Switching Frequency(Min)1000 kHz
TopologyBuck/Boost
TypeCharge Pump
Vin(Max)5.5 V
Vin(Min)1.8 V
Vout(Max)2.5 V
Vout(Min)2.5 V

Öko-Plan

RoHSCompliant

Design Kits und Evaluierungsmodule

  • Evaluation Modules & Boards: REG710EVM-33
    Evaluation Module For Buck-Boost Charge Pump REG710
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: REG710EVM-5
    Evaluation Module For Buck-Boost Charge Pump REG710-5
    Lifecycle Status: Active (Recommended for new designs)

Anwendungshinweise

  • Optimizing Output Voltage Ripple for the REG710
    PDF, 56 Kb, Datei veröffentlicht: Feb 10, 2003
    Many portable power applications require a power source that has buck?boost capability with low output ripple. For this application, the REG710 is a prime choice; however understanding the affects of the pump and output capacitors allows designers to take full advantage of theREG710?s capabilities in order to minimize output voltage ripple.
  • Using the TPS3619 with MSP430 Microcontrollers Can Reduce Sys Power Consumption (Rev. A)
    PDF, 37 Kb, Revision: A, Datei veröffentlicht: May 19, 2003
    The MSP430 series of microcontrollers are ideal in applications where battery life is critical. These microcontollers require only 0.1?A of current in low-power RAM retention mode; In this mode the microcontroller must have power to retain volatile memory. In some systems with charge pumps, the TPS3619 can be used to shut down the charge pump, saving system power consumption.

Modellreihe

Herstellerklassifikation

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Buck/Boost, Inverting or Split-Rail > Buck/Boost or Inverting Charge Pump (Inductorless)

Andere Namen:

REG710NA2.5/250, REG710NA 2.5/250