Datasheet Texas Instruments ADS41B49IRGZT — Datenblatt

HerstellerTexas Instruments
SerieADS41B49
ArtikelnummerADS41B49IRGZT
Datasheet Texas Instruments ADS41B49IRGZT

14-Bit-Analog-Digital-Wandler (ADC) mit 250 MSPS, 48-VQFN -40 bis 85

Datenblätter

ADS41Bx9 14- and 12-Bit, 250-MSPS, Ultralow-Power ADCs with Analog Buffers datasheet
PDF, 2.6 Mb, Revision: F, Datei veröffentlicht: Feb 11, 2016
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Verpackung

Pin48
Package TypeRGZ
Industry STD TermVQFN
JEDEC CodeS-PQFP-N
Package QTY250
CarrierSMALL T&R
Device MarkingAZ41B49
Width (mm)7
Length (mm)7
Thickness (mm).9
Pitch (mm).5
Max Height (mm)1
Mechanical DataHerunterladen

Parameter

# Input Channels1
Analog Input BW800 MHz
ArchitecturePipeline
DNL(Typ)2.5 +/-LSB
ENOB11.5 Bits
INL(Max)5 +/-LSB
INL(Typ)2.5 +/-LSB
Input BufferYes
Input Range1.5 Vp-p
InterfaceDDR LVDS,Parallel CMOS
Operating Temperature Range-40 to 85 C
Package GroupVQFN
Package Size: mm2:W x L48VQFN: 49 mm2: 7 x 7(VQFN) PKG
Power Consumption(Typ)350 mW
RatingCatalog
Reference ModeInt
Resolution14 Bits
SFDR89 dB
SINAD69.5 dB
SNR71.7 dB
Sample Rate(Max)250 MSPS

Öko-Plan

RoHSCompliant

Design Kits und Evaluierungsmodule

  • Evaluation Modules & Boards: ADS41B49EVM
    ADS41B49 14-Bit, 250-MSPS Analog-to-Digital Converter Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: ADS4149EVM
    ADS4149 14-Bit, 250-MSPS Analog-to-Digital Converter Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: TSW3085EVM
    Wideband Transmit Signal Chain Evaluation Board and Reference Design
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: TSW2200EVM
    TSW2200 Low-Cost Portable Power Supply Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: TSW1405EVM
    Data Capture: Data Converter EVMs With 8 LVDS Lanes up to 1.0Gbps
    Lifecycle Status: Active (Recommended for new designs)

Anwendungshinweise

  • Power Supply Design for the ADS41xx (Rev. A)
    PDF, 401 Kb, Revision: A, Datei veröffentlicht: Dec 29, 2011
    System designers traditionally power the high-speed data converter in their systems from a low-noise, low-dropout linear regulator (LDO) in order to achieve the performance described in the analog-to-digital converter (ADC) data sheet. However, LDOs inherently are not very power efficient. Switching regulators, on the other hand, offer good power efficiency but typically come with higher output no
  • High-Speed Analog-to-Digital Converter Basics
    PDF, 1.1 Mb, Datei veröffentlicht: Jan 11, 2012
    The goal of this document is to introduce a wide range of theories and topics that are relevant tohigh-speed analog-to-digital converters (ADC). This document provides details on sampling theorydata-sheet specifications ADC selection criteria and evaluation methods clock jitter and other commonsystem-level concerns. In addition some end-users will want to extend the performance capabil
  • Band-Pass Filter Design Techniques for High-Speed ADCs
    PDF, 733 Kb, Datei veröffentlicht: Feb 27, 2012
    Several well-known methods exist for designing passive inductor-capacitor (LC) filters with resistive load terminations. However, when LC filters are used to drive the analog input pins of a high-speed analog-to-digital converter (ADC), special consideration must be given to the ADC input impedance. Not accounting for the ADC input impedance often results in a filter design that does not meet the
  • QFN Layout Guidelines
    PDF, 1.3 Mb, Datei veröffentlicht: Jul 28, 2006
    Board layout and stencil information for most Texas Instruments Quad Flat No-Lead (QFN) devices is provided in their data sheets. This document helps printed-circuit board designers understand and better use this information for optimal designs.
  • CDCE62005 as Clock Solution for High-Speed ADCs
    PDF, 805 Kb, Datei veröffentlicht: Sep 4, 2008
    TI has introduced a family of devices well-suited to meet the demands for high-speed ADC devices such as the ADS5527 which is capable of sampling up to 210 MSPS. To realize the full potential of these high-performance products it is imperative to provide a low phase noise clock source. The CDCE62005 clock synthesizer chip offers a real-world clocking solution to meet these stringent requirements
  • Why Use Oversampling when Undersampling Can Do the Job? (Rev. A)
    PDF, 1.2 Mb, Revision: A, Datei veröffentlicht: Jul 19, 2013
  • Design Considerations for Avoiding Timing Errors during High-Speed ADC, LVDS Dat (Rev. A)
    PDF, 2.0 Mb, Revision: A, Datei veröffentlicht: May 22, 2015
  • Phase Noise Performance and Jitter Cleaning Ability of CDCE72010
    PDF, 2.3 Mb, Datei veröffentlicht: Jun 2, 2008
    This application report presents phase noise data taken on the CDCE72010 jitter cleaner and synchronizer PLL device. The phase noise performance of the CDCE72010 depends on the phase noise of the reference clock VCXO clock and the CDCE72010 itself. This application report shows the phase noise performance at several of the most popular CDMA frequencies. This data helps the user to choose the rig
  • CDCE72010 as a Clocking Solution for High-Speed Analog-to-Digital Converters
    PDF, 424 Kb, Datei veröffentlicht: Jun 8, 2008
    Texas Instruments has recently introduced a family of devices suitable to meet the demands of high-speed high-IF sampling analog-to-digital converters (ADCs) such as the ADS5483 which is capable of sampling up to 135 MSPS. To realize the full potential of these high-performance devices the system must provide an extremely low phase noise clock source. The CDCE72010 clock synthesizer chip offers
  • Principles of Data Acquisition and Conversion (Rev. A)
    PDF, 132 Kb, Revision: A, Datei veröffentlicht: Apr 16, 2015
  • A Glossary of Analog-to-Digital Specifications and Performance Characteristics (Rev. B)
    PDF, 425 Kb, Revision: B, Datei veröffentlicht: Oct 9, 2011
    This glossary is a collection of the definitions of Texas Instruments' Delta-Sigma (О”ОЈ), successive approximation register (SAR), and pipeline analog-to-digital (A/D) converter specifications and performance characteristics. Although there is a considerable amount of detail in this document, the product data sheet for a particular product specification is the best and final reference.
  • Analog-to-Digital Converter Grounding Practices Affect System Performance (Rev. A)
    PDF, 69 Kb, Revision: A, Datei veröffentlicht: May 18, 2015

Modellreihe

Serie: ADS41B49 (2)

Herstellerklassifikation

  • Semiconductors > Data Converters > Analog-to-Digital Converters (ADCs) > High Speed ADCs (>10MSPS)