Datasheet Texas Instruments SN74LVC06AQDRG4Q1 — Datenblatt

HerstellerTexas Instruments
SerieSN74LVC06A-Q1
ArtikelnummerSN74LVC06AQDRG4Q1
Datasheet Texas Instruments SN74LVC06AQDRG4Q1

Fahrzeugkatalog Hex Inverter Puffer / Treiber mit Open-Drain-Ausgängen 14-SOIC -40 bis 125

Datenblätter

Hex Inverter Buffer/Driver With Open-Drain Outputs datasheet
PDF, 782 Kb, Revision: B, Datei veröffentlicht: Apr 9, 2008
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Verpackung

Pin14
Package TypeD
Industry STD TermSOIC
JEDEC CodeR-PDSO-G
Package QTY2500
CarrierLARGE T&R
Device MarkingLVC06AQ
Width (mm)3.91
Length (mm)8.65
Thickness (mm)1.58
Pitch (mm)1.27
Max Height (mm)1.75
Mechanical DataHerunterladen

Parameter

Bits6
F @ Nom Voltage(Max)100 Mhz
ICC @ Nom Voltage(Max)0.01 mA
Operating Temperature Range-40 to 125 C
Output Drive (IOL/IOH)(Max)-24/24 mA
Package GroupSOIC
Package Size: mm2:W x L14SOIC: 52 mm2: 6 x 8.65(SOIC) PKG
RatingAutomotive
Schmitt TriggerNo
Technology FamilyLVC
VCC(Max)3.6 V
VCC(Min)1.65 V
Voltage(Nom)2.7,3.3 V
tpd @ Nom Voltage(Max)3.9,3.7 ns

Öko-Plan

RoHSCompliant

Anwendungshinweise

  • LVC Characterization Information
    PDF, 114 Kb, Datei veröffentlicht: Dec 1, 1996
    This document provides characterization information about low-voltage logic (LVL) that operates from a 3.3-V power supply. It addresses the issues of interfacing to 5-V logic ac performance power considerations input and output characteristics and signal integrity for this family of devices.
  • Use of the CMOS Unbuffered Inverter in Oscillator Circuits
    PDF, 796 Kb, Datei veröffentlicht: Nov 6, 2003
    CMOS devices have a high input impedance high gain and high bandwidth. These characteristics are similar to ideal amplifier characteristics and hence a CMOS buffer or inverter can be used in an oscillator circuit in conjunction with other passive components. Now CMOS oscillator circuits are widely used in high-speed applications because they are economical easy to use and take significantly
  • Power-Up 3-State (PU3S) Circuits in TI Standard Logic Devices
    PDF, 209 Kb, Datei veröffentlicht: May 10, 2002
    Many telecom and networking applications require that cards be inserted and extracted from a live backplane without interrupting data or damaging components. To achieve this interface terminals of the card must be electrically isolated from the bus system during insertion or extraction from the backplane. To facilitate this Texas Instruments provides bus-interface and logic devices with features

Modellreihe

Herstellerklassifikation

  • Semiconductors > Logic > Buffer/Driver/Transceiver > Inverting Buffer/Driver