Datasheet Texas Instruments ADS8405IPFBTG4 — Datenblatt

HerstellerTexas Instruments
SerieADS8405
ArtikelnummerADS8405IPFBTG4
Datasheet Texas Instruments ADS8405IPFBTG4

16-Bit 1,25 MSPS Unipolar Input Micro Power Sampling ADC 48-TQFP -40 bis 85

Datenblätter

ADS8405: 16-Bit, 1.25-MSPS Unipolar Pseuso-Diff Input, Micropower Sampling ADC datasheet
PDF, 1.7 Mb, Datei veröffentlicht: Dec 17, 2004
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Verpackung

Pin48
Package TypePFB
Industry STD TermTQFP
JEDEC CodeS-PQFP-G
Package QTY250
CarrierSMALL T&R
Device MarkingADS8405I
Width (mm)7
Length (mm)7
Thickness (mm)1
Pitch (mm).5
Max Height (mm)1.2
Mechanical DataHerunterladen

Parameter

# Input Channels1
Analog Voltage AVDD(Max)5.25 V
Analog Voltage AVDD(Min)4.75 V
ArchitectureSAR
Digital Supply(Max)5.25 V
Digital Supply(Min)2.7 V
INL(Max)2 +/-LSB
Input Range(Max)4.2 V
Input TypePseudo-Differential,Single-Ended
Integrated FeaturesOscillator
InterfaceParallel
Multi-Channel ConfigurationN/A
Operating Temperature Range-40 to 85 C
Package GroupTQFP
Package Size: mm2:W x L48TQFP: 81 mm2: 9 x 9(TQFP) PKG
Power Consumption(Typ)155 mW
RatingCatalog
Reference ModeExt,Int
Resolution16 Bits
SINAD85 dB
SNR86 dB
Sample Rate (max)1.25MSPS SPS
Sample Rate(Max)1.25 MSPS
THD(Typ)-90 dB

Öko-Plan

RoHSCompliant

Anwendungshinweise

  • Using ADS8411 in a Multiplexed Analog Input Application (Rev. A)
    PDF, 2.1 Mb, Revision: A, Datei veröffentlicht: Feb 15, 2006
    This application report is intended as a guide for using an analog multiplexer to multiplex several input signals to a single high-resolution, high-speed SAR analog-to-digital converter (ADC). The ADC and the multiplexer used were the ADS8411 and the TS5A3159/3359, respectively. This document discusses the important parameters of a multiplexer and defines a few important measurements for evaluatin
  • Determining Minimum Acquisition Times for SAR ADCs, part 1 (Rev. A)
    PDF, 227 Kb, Revision: A, Datei veröffentlicht: Nov 10, 2010
    This application report analyzes a simple method for calculating minimum acquisition times for successive-approximation register analog-to-digital converters (SAR ADCs). The input structure of the ADC is examined along with the driving circuit. The voltage on the sampling capacitor is then determined for the case when a step function is applied to the input of the driving circuit. Three different
  • Determining Minimum Acquisition Times for SAR ADCs, part 2
    PDF, 215 Kb, Datei veröffentlicht: Mar 17, 2011
    The input structure circuit of a successive-approximation register analog-to-digital converter (SAR ADC) incombination with the driving circuit forms a transfer function that can be used to determine minimum acquisition times for different types of applied input signals. This application report, which builds on Determining Minimum Acquisition Times for SAR ADCs When a Step Function is Applied to

Modellreihe

Herstellerklassifikation

  • Semiconductors > Data Converters > Analog-to-Digital Converters (ADCs) > Precision ADCs (<=10MSPS)