Datasheet Texas Instruments UC3526ADWG4 — Datenblatt

UC1526A
UC2526A
UC3526A Regulating Pulse Width Modulator
FEATURES DESCRIPTION Reduced Supply Current Oscillator Frequency to 600kHz Precision Band-Gap Reference 7 to 35V Operation Dual 200mA Source/Sink Outputs Minimum Output Cross-Conduction Double-Pulse Suppression Logic The UC1526A Series are improved-performance pulse-width modulator circuits intended for direct replacement of equivalent non-“A”
versions in all applications. Higher frequency operation has been
enhanced by several significant improvements including: a more accurate oscillator with less minimum dead time, reduced circuit delays (particularly in current limiting), and an improved output stage
with negligible cross-conduction current. Additional improvements
include the incorporation of a precision, band-gap reference generator, reduced overall supply current, and the addition of thermal
shutdown protection. Under-Voltage Lockout Programmable Soft-Start Thermal Shutdown TTL/CMOS Compatible Logic Ports 5 Volt Operation (VIN = VC = VREF = 5.0V) BLOCK DIAGRAM 6/93 Along with these improvements, the UC1526A Series retains the
protective features of under-voltage lockout, soft-start, digital current limiting, double pulse suppression logic, and adjustable
deadtime. For ease of interfacing, all digital control ports are TTL
compatible with active low logic.
Five volt (5V) operation is possible for “logic level” applications by
connecting VIN, VC and VREF to a precision 5V input supply. Consult
factory for additional information. UC1526A
UC2526A
UC3526A
ABSOLUTE MAXIMUM RATINGS (Note 1, 2) RECOMMENDED OPERATING CONDITIONS Input Voltage (+VIN) +40V
Collector Supply Voltage (+VC) . +40V
Logic Inputs -0.3V to +5.5V
Analog Inputs -0.3V to +VIN
Source/Sink Load Current (each output) 200mA
Reference Load Current 50mA …