Datasheet Texas Instruments THS6072CDGNR — Datenblatt
| Hersteller | Texas Instruments |
| Serie | THS6072 |
| Artikelnummer | THS6072CDGNR |
ADSL-Differenzialempfänger mit geringem Stromverbrauch 8-MSOP-PowerPAD 0 bis 70
Datenblätter
Low-Power ADSL Differntial Receivers datasheet
PDF, 1.2 Mb, Revision: B, Datei veröffentlicht: Jun 25, 2001
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Obsolete (Manufacturer has discontinued the production of the device) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 8 |
| Package Type | DGN |
| Industry STD Term | HVSSOP |
| JEDEC Code | S-PDSO-G |
| Device Marking | AHZ |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | 1.02 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.1 |
| Mechanical Data | Herunterladen |
Parameter
| 2nd Harmonic(dBc) | 81 |
| 3rd Harmonic(dBc) | 87 |
| @ MHz | 1 |
| Acl, min spec gain(V/V) | 1 |
| Additional Features | N/A |
| Approx. Price (US$) | 2.35 | 1ku |
| Architecture | Bipolar Voltage FB |
| BW @ Acl(MHz) | 175 |
| CMRR(Min)(dB) | 78 |
| CMRR(Typ)(dB) | 90 |
| GBW(Typ)(MHz) | 175 |
| Input Bias Current(Max)(pA) | 10000000 |
| Iq per channel(Max)(mA) | 4.2 |
| Iq per channel(Typ)(mA) | 3.4 |
| Number of Channels(#) | 2 |
| Offset Drift(Typ)(uV/C) | 15 |
| Operating Temperature Range(C) | -40 to 85 0 to 70 |
| Output Current(Typ)(mA) | 85 |
| Package Group | MSOP-PowerPAD |
| Package Size: mm2:W x L (PKG) | 8MSOP-PowerPAD: 15 mm2: 4.9 x 3(MSOP-PowerPAD) |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ)(V/us) | 230 |
| Total Supply Voltage(Max)(+5V=5, +/-5V=10) | 32 |
| Total Supply Voltage(Min)(+5V=5, +/-5V=10) | 9 |
| Vn at Flatband(Typ)(nV/rtHz) | 10 |
| Vos (Offset Voltage @ 25C)(Max)(mV) | 7 |
Öko-Plan
| RoHS | Not Compliant |
| Pb Free | No |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: THS6072EVM
THS6072 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Active Output Impedance for ADSL Line DriversPDF, 636 Kb, Datei veröffentlicht: Nov 26, 2002
Signal termination is very common in bidirectional communication systems. Termination allows for receiving signals while transmitting different signals at the same time. With the increasing popularity of asymmetrical digital subscriber lines (ADSL), the requirement for a low power line driver amplifier combined with line termination becomes a very difficult goal. This application note examines the - Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revision: A, Datei veröffentlicht: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Modellreihe
Serie: THS6072 (7)
- THS6072CD THS6072CDGN THS6072CDGNR THS6072CDGNRG4 THS6072ID THS6072IDG4 THS6072IDGNR
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)