Datasheet Texas Instruments TS5A9411DCKR — Datenblatt
| Hersteller | Texas Instruments |
| Serie | TS5A9411 |
| Artikelnummer | TS5A9411DCKR |
10-Ohm-SPDT-Analogschalter 6-SC70 -40 bis 85
Datenblätter
TS5A9411 10-О© 1:2 SPDT Analog Switch Single-Channel 2:1 Multiplexer and Demultiplexer datasheet
PDF, 963 Kb, Revision: B, Datei veröffentlicht: Dec 16, 2016
Auszug aus dem Dokument
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 6 | 6 | 6 | 6 |
| Package Type | DCK | DCK | DCK | DCK |
| Industry STD Term | SOT-SC70 | SOT-SC70 | SOT-SC70 | SOT-SC70 |
| JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G | R-PDSO-G |
| Package QTY | 3000 | 3000 | 3000 | 3000 |
| Carrier | LARGE T&R | LARGE T&R | LARGE T&R | LARGE T&R |
| Device Marking | 32P | 32R | 32F | 32H |
| Width (mm) | 1.25 | 1.25 | 1.25 | 1.25 |
| Length (mm) | 2 | 2 | 2 | 2 |
| Thickness (mm) | .9 | .9 | .9 | .9 |
| Pitch (mm) | .65 | .65 | .65 | .65 |
| Max Height (mm) | 1.1 | 1.1 | 1.1 | 1.1 |
| Mechanical Data | Herunterladen | Herunterladen | Herunterladen | Herunterladen |
Parameter
| Additional Features | Break-before-make |
| Bandwidth | 100 MHz |
| Bandwidth(Max) | 100 MHz |
| Configuration | 2:1 SPDT |
| ESD Charged Device Model | 1 kV |
| ESD HBM | 2 kV |
| Input/Ouput Voltage(Max) | 5.5 V |
| Input/Output Continuous Current(Max) | 50 mA |
| Input/Output OFF-state Capacitance(Typ) | 3.5 pF |
| Input/Output ON-state Capacitance(Typ) | 8.5 pF |
| Number of Channels | 1 |
| OFF-state leakage current(Max) | 0.003 µA |
| ON-state leakage current(Max) | 0.003 µA |
| Operating Temperature Range | -40 to 85 C |
| Package Group | SC70 |
| Package Size: mm2:W x L | 6SC70: 4 mm2: 2.1 x 2(SC70) PKG |
| Rating | Catalog |
| Ron(Max) | 28 Ohms |
| Ron(Typ) | 5.3 Ohms |
| Supply Current(Max) | 3 uA |
| Supply Range | 5.5 Max |
| VIH(Min) | 2 V |
| VIL(Max) | 0.8 V |
| Vdd(Max) | 5.5 V |
| Vdd(Min) | 2.25 V |
| Vss(Max) | N/A V |
| Vss(Min) | N/A V |
Öko-Plan
| RoHS | Compliant |
Anwendungshinweise
- Preventing Excess Power Consumption on Analog SwitchesPDF, 238 Kb, Datei veröffentlicht: Jul 3, 2008
Analog switches are extensively used for switching audio signals in battery-powered applications, such as mobile phones. In any cases, the switch is powered directly from the battery, but it receives control signals from a lower voltage processor GPIO. For most analog switches, this application condition leads to an excess supply current draw that catches system designers by surprise. This applica
Modellreihe
Serie: TS5A9411 (4)
- TS5A9411DCKR TS5A9411DCKRG4 TS5A9411DCKT TS5A9411DCKTG4
Herstellerklassifikation
- Semiconductors > Switches and Multiplexers > Analog Switches/Muxes