Datasheet Texas Instruments TPS60110PWPRG4 — Datenblatt

HerstellerTexas Instruments
SerieTPS60110
ArtikelnummerTPS60110PWPRG4
Datasheet Texas Instruments TPS60110PWPRG4

Geregelte geräuscharme 5-V-Hochleistungs-Ladepumpe DC / DC-Wandler 20-HTSSOP -40 bis 85

Datenblätter

Regulated 5-V 300-mA Low-Noise Charge Pump DC/DC Converter datasheet
PDF, 993 Kb, Revision: C, Datei veröffentlicht: Aug 7, 2008
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Verpackung

Pin20
Package TypePWP
Industry STD TermHTSSOP
JEDEC CodeR-PDSO-G
Package QTY2000
CarrierLARGE T&R
Device MarkingTPS60110
Width (mm)4.4
Length (mm)6.5
Thickness (mm)1
Pitch (mm).65
Max Height (mm)1.2
Mechanical DataHerunterladen

Parameter

Iout(Max)0.3 A
Iq(Typ)0.05 mA
Operating Temperature Range-40 to 85 C
Package GroupHTSSOP
RatingCatalog
Regulated Outputs1
Special FeaturesEnable,Frequency Synchronization
Switching Frequency(Max)400 kHz
Switching Frequency(Min)200 kHz
TypeCharge Pump
Vin(Max)5.4 V
Vin(Min)2.7 V
Vout(Max)5 V
Vout(Min)5 V

Öko-Plan

RoHSCompliant

Design Kits und Evaluierungsmodule

  • Evaluation Modules & Boards: TPS60110EVM-132
    3 battery cells/1 Li-Ion cell to 5.0V, 300mA zero ripple charge pump EVM
    Lifecycle Status: Active (Recommended for new designs)

Anwendungshinweise

  • Additional Negative Output with TPS601xx
    PDF, 64 Kb, Datei veröffentlicht: Mar 26, 2001
    In addition to a main positive supply voltage, some applications also require a negative voltage at low current. The power-supply circuit should easily be able to provide the application with this additional supply voltage. This note discusses a simple way to derive a negative voltage from a charge pump dc/dc converter. An easy solution to stabilize the negative voltage is to use a shunt regulator
  • TPS6010x/TPS6011x Charge Pump (Rev. A)
    PDF, 391 Kb, Revision: A, Datei veröffentlicht: Dec 16, 1999
    Charge pumps are dc/dc converters that use a capacitor instead of an inductor or transformer for energy storage. They are able to generate positive or negative voltages from the input voltage. The input voltage can be multiplied by some factor such as 0.5, 2, 3, and so on, to generate the output voltage desired. Often, charge pumps and all related parts (including those used for energy storage) ar
  • PowerPAD Thermally Enhanced Package (Rev. H)
    PDF, 983 Kb, Revision: H, Datei veröffentlicht: Jul 6, 2018
  • Extending the Soft Start Time Without a Soft Start Pin (Rev. B)
    PDF, 387 Kb, Revision: B, Datei veröffentlicht: Jun 15, 2017
  • Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
    PDF, 418 Kb, Revision: A, Datei veröffentlicht: Dec 11, 2018
    When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

Modellreihe

Serie: TPS60110 (4)

Herstellerklassifikation

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Charge Pump (Inductorless)