Datasheet Texas Instruments TLV2361IDBVT — Datenblatt

HerstellerTexas Instruments
SerieTLV2361
ArtikelnummerTLV2361IDBVT
Datasheet Texas Instruments TLV2361IDBVT

Einzelner Hochleistungs- und Niederspannungs-Operationsverstärker 5-SOT-23 -40 bis 85

Datenblätter

High-Performance Low-Voltage Operational Amplifiers datasheet
PDF, 1.3 Mb, Revision: H, Datei veröffentlicht: Jun 27, 2007
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Verpackung

Pin555
Package TypeDBVDBVDBV
Industry STD TermSOT-23SOT-23SOT-23
JEDEC CodeR-PDSO-GR-PDSO-GR-PDSO-G
Package QTY250250250
CarrierSMALL T&RSMALL T&RSMALL T&R
Device MarkingYC4GYC4LYC4B
Width (mm)1.61.61.6
Length (mm)2.92.92.9
Thickness (mm)1.21.21.2
Pitch (mm).95.95.95
Max Height (mm)1.451.451.45
Mechanical DataHerunterladenHerunterladenHerunterladen

Parameter

Additional FeaturesN/A
ArchitectureBipolar
CMRR(Min)85 dB
CMRR(Typ)60 dB
GBW(Typ)7 MHz
Input Bias Current(Max)150000 pA
Iq per channel(Max)2.5 mA
Iq per channel(Typ)1.75 mA
Number of Channels1
Operating Temperature Range-40 to 85,0 to 70 C
Output Current(Typ)1.2 mA
Package GroupSOT-23
Package Size: mm2:W x L5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG
Rail-to-RailNo
RatingCatalog
Slew Rate(Typ)3 V/us
Total Supply Voltage(Max)5 +5V=5, +/-5V=10
Total Supply Voltage(Min)2 +5V=5, +/-5V=10
Vn at 1kHz(Typ)8 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)6 mV

Öko-Plan

RoHSCompliant

Anwendungshinweise

  • Stability Analysis Of Voltage-Feedback Op Amps Including Compensation Technique (Rev. A)
    PDF, 197 Kb, Revision: A, Datei veröffentlicht: Mar 12, 2001
    This report presents an analysis of the stability of voltage-feedback operational amplifiers (op amps) using circuit performance as the criteria to attain a successful design. It discusses several compensation techniques for op amps with and without internal compensation.
  • Conditioning a Switch-mode Power Supply Current Signal Using TI Op Amps
    PDF, 61 Kb, Datei veröffentlicht: Mar 23, 2000
    The switch-mode power supply primary current is often sensed using a power resistor. Using an op amp to amplify the current-sense signal can reduce cost and improve noise performance and efficiency. This report reviews the advantages of using an op amp circuit and analyzes the design criteria needed to choose the proper op amp.
  • Use of Rail-to-Rail Operational Amplifiers (Rev. A)
    PDF, 159 Kb, Revision: A, Datei veröffentlicht: Dec 22, 1999
    This application report assists design engineers to understand the functionality and benefits of rail-to-rail operational amplifiers. It shows simplified schematics, functions, and characteristics of the input and output stages. Typical application schematics for rail-to-rail operational amplifiers are also discussed.

Modellreihe

Herstellerklassifikation

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps