Datasheet Texas Instruments SN74LVTH16646DGGR — Datenblatt

HerstellerTexas Instruments
SerieSN74LVTH16646
ArtikelnummerSN74LVTH16646DGGR
Datasheet Texas Instruments SN74LVTH16646DGGR

3,3 V ABT 16-Bit-Bus-Transceiver und -Register mit 3-Zustands-Ausgängen 56-TSSOP -40 bis 85

Datenblätter

SN54LVTH16646, SN74LVTH16646 datasheet
PDF, 398 Kb, Revision: G, Datei veröffentlicht: May 3, 2004
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Verpackung

Pin56
Package TypeDGG
Industry STD TermTSSOP
JEDEC CodeR-PDSO-G
Package QTY2000
CarrierLARGE T&R
Device MarkingLVTH16646
Width (mm)6.1
Length (mm)14
Thickness (mm)1.15
Pitch (mm).5
Max Height (mm)1.2
Mechanical DataHerunterladen

Parameter

Bits16
F @ Nom Voltage(Max)160 Mhz
ICC @ Nom Voltage(Max)0.005 mA
Operating Temperature Range-40 to 85 C
Output Drive (IOL/IOH)(Max)-32/64 mA
Package GroupTSSOP
Package Size: mm2:W x L56TSSOP: 113 mm2: 8.1 x 14(TSSOP) PKG
RatingCatalog
Schmitt TriggerNo
Technology FamilyLVT
VCC(Max)3.6 V
VCC(Min)2.7 V
Voltage(Nom)3.3 V
tpd @ Nom Voltage(Max)4.2 ns

Öko-Plan

RoHSCompliant

Anwendungshinweise

  • LVT Family Characteristics (Rev. A)
    PDF, 98 Kb, Revision: A, Datei veröffentlicht: Mar 1, 1998
    To address the need for a complete low-voltage interface solution, Texas Instruments has developed a new generation of logic devices capable of mixed-mode operation. The LVT series relies on a state-of-the-art submicron BiCMOS process to provide up to a 90% reduction in static power dissipation over ABT. LVT devices solve the system need for a transparent seam between the low-voltage and 5-V secti
  • LVT-to-LVTH Conversion
    PDF, 84 Kb, Datei veröffentlicht: Dec 8, 1998
    Original LVT devices that have bus hold have been redesigned to add the High-Impedance State During Power Up and Power Down feature. Additional devices with and without bus hold have been added to the LVT product line. Design guidelines and issues related to the bus-hold features, switching characteristics, and timing requirements are discussed.
  • Bus-Hold Circuit
    PDF, 418 Kb, Datei veröffentlicht: Feb 5, 2001
    When designing systems that include CMOS devices, designers must pay special attention to the operating condition in which all of the bus drivers are in an inactive, high-impedance condition (3-state). Unless special measures are taken, this condition can lead to undefined levels and, thus, to a significant increase in the device?s power dissipation. In extreme cases, this leads to oscillation of

Modellreihe

Herstellerklassifikation

  • Semiconductors > Logic > Buffer/Driver/Transceiver > Registered Transceiver