Datasheet Texas Instruments DAC7654YCTG4 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | DAC7654 |
| Artikelnummer | DAC7654YCTG4 |
16-Bit-Quad-Spannungsausgang Digital-Analog-Wandler 64-LQFP -40 bis 85
Datenblätter
DAC7654: 16-Bit, Quad Voltage Output Digital-To-Analog Converter datasheet
PDF, 1.2 Mb, Revision: A, Datei veröffentlicht: Dec 13, 2005
Auszug aus dem Dokument
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 64 | 64 |
| Package Type | PM | PM |
| Industry STD Term | LQFP | LQFP |
| JEDEC Code | S-PQFP-G | S-PQFP-G |
| Package QTY | 250 | 250 |
| Carrier | SMALL T&R | SMALL T&R |
| Device Marking | DAC7654Y | C |
| Width (mm) | 10 | 10 |
| Length (mm) | 10 | 10 |
| Thickness (mm) | 1.4 | 1.4 |
| Pitch (mm) | .5 | .5 |
| Max Height (mm) | 1.6 | 1.6 |
| Mechanical Data | Herunterladen | Herunterladen |
Parameter
| Code to Code Glitch(Typ) | 1 nV-sec |
| DAC Architecture | R-2R |
| DAC Channels | 4 |
| Gain Error(Max) | 0.8 %FSR |
| INL(Max) | 3 +/-LSB |
| Interface | SPI |
| Offset Error(Max) | N/A % |
| Operating Temperature Range | -40 to 85 C |
| Output Range Max. | 2.5 mA/V |
| Output Range Min. | -2.5 mA/V |
| Output Type | Buffered Voltage |
| Package Group | LQFP |
| Package Size: mm2:W x L | 64LQFP: 144 mm2: 12 x 12(LQFP) PKG |
| Power Consumption(Typ) | 18 mW |
| Rating | Catalog |
| Reference: Type | Ext,Int |
| Resolution | 16 Bits |
| Sample / Update Rate | 0.1 MSPS |
| Settling Time | 12 µs |
| Special Features | Reset to Mid-Scale,SDO |
| Zero Code Error(Typ) | 5 mV |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: DAC7654EVM
DAC7654 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Interfacing the DAC7654 to the MSP430F449PDF, 411 Kb, Datei veröffentlicht: Aug 16, 2004
This application report shows how easy it is to interface the DAC7654 digital-to-analog converter to the MSP430F449 mixed signal microcontroller using the SPI mode of serial communication. By using the software program provided in this application report, a simple routine can be created to generate a sinusoidal waveform. Using the DAC7654 EVM along with the HPA449 evaluation system makes developin - Interfacing the TLC4541 & the DAC7654 to the MSP430F449PDF, 877 Kb, Datei veröffentlicht: Aug 12, 2005
The purpose of this application report is to demonstrate the combination of a serial analog-to-digital converter (ADC) and a serial digital-to-analog converter (DAC) on a development platform. The ADC and the DAC featured are the TLC4541 and the DAC7654, respectively. These devices are presented using the HPA449 as a low-cost development platform. The application report briefly describes each comp
Modellreihe
Serie: DAC7654 (3)
- DAC7654YCT DAC7654YCTG4 DAC7654YT
Herstellerklassifikation
- Semiconductors > Data Converters > Digital-to-Analog Converters (DACs) > Precision DACs (=<10MSPS)