Datasheet Texas Instruments SN74LVTH652DW — Datenblatt

HerstellerTexas Instruments
SerieSN74LVTH652
ArtikelnummerSN74LVTH652DW
Datasheet Texas Instruments SN74LVTH652DW

3,3-V-ABT-Oktalbus-Transceiver und -Register mit 3-Zustands-Ausgängen 24-SOIC -40 bis 85

Datenblätter

SN54LVTH652, SN74LVTH652 datasheet
PDF, 868 Kb, Revision: F, Datei veröffentlicht: Oct 13, 2003
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Verpackung

Pin24
Package TypeDW
Industry STD TermSOIC
JEDEC CodeR-PDSO-G
Package QTY25
CarrierTUBE
Device MarkingLVTH652
Width (mm)7.5
Length (mm)15.4
Thickness (mm)2.35
Pitch (mm)1.27
Max Height (mm)2.65
Mechanical DataHerunterladen

Parameter

Bits8
F @ Nom Voltage(Max)160 Mhz
ICC @ Nom Voltage(Max)0.005 mA
Operating Temperature Range-40 to 85 C
Output Drive (IOL/IOH)(Max)-32/64 mA
Package GroupSOIC
Package Size: mm2:W x L24SOIC: 160 mm2: 10.3 x 15.5(SOIC) PKG
RatingCatalog
Schmitt TriggerNo
Technology FamilyLVT
VCC(Max)3.6 V
VCC(Min)2.7 V
Voltage(Nom)3.3 V
tpd @ Nom Voltage(Max)4.7 ns

Öko-Plan

RoHSCompliant

Anwendungshinweise

  • LVT Family Characteristics (Rev. A)
    PDF, 98 Kb, Revision: A, Datei veröffentlicht: Mar 1, 1998
    To address the need for a complete low-voltage interface solution, Texas Instruments has developed a new generation of logic devices capable of mixed-mode operation. The LVT series relies on a state-of-the-art submicron BiCMOS process to provide up to a 90% reduction in static power dissipation over ABT. LVT devices solve the system need for a transparent seam between the low-voltage and 5-V secti
  • LVT-to-LVTH Conversion
    PDF, 84 Kb, Datei veröffentlicht: Dec 8, 1998
    Original LVT devices that have bus hold have been redesigned to add the High-Impedance State During Power Up and Power Down feature. Additional devices with and without bus hold have been added to the LVT product line. Design guidelines and issues related to the bus-hold features, switching characteristics, and timing requirements are discussed.
  • Bus-Hold Circuit
    PDF, 418 Kb, Datei veröffentlicht: Feb 5, 2001
    When designing systems that include CMOS devices, designers must pay special attention to the operating condition in which all of the bus drivers are in an inactive, high-impedance condition (3-state). Unless special measures are taken, this condition can lead to undefined levels and, thus, to a significant increase in the device?s power dissipation. In extreme cases, this leads to oscillation of

Modellreihe

Herstellerklassifikation

  • Semiconductors > Logic > Buffer/Driver/Transceiver > Registered Transceiver