Datasheet Texas Instruments MSP430F6779IPZ — Datenblatt
Hersteller | Texas Instruments |
Serie | MSP430F6779 |
Artikelnummer | MSP430F6779IPZ |
MSP430F6779 Mixed Signal Microcontroller 100-LQFP -40 bis 85
Datenblätter
MSP430F677x, MSP430F676x, MSP430F674x Polyphase Metering SoCs datasheet
PDF, 1.9 Mb, Revision: D, Datei veröffentlicht: Dec 19, 2013
Auszug aus dem Dokument
Preise
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | No |
Verpackung
Pin | 100 |
Package Type | PZ |
Industry STD Term | LQFP |
JEDEC Code | S-PQFP-G |
Package QTY | 90 |
Carrier | JEDEC TRAY (10+1) |
Device Marking | F6779 |
Width (mm) | 14 |
Length (mm) | 14 |
Thickness (mm) | 1.4 |
Pitch (mm) | .5 |
Max Height (mm) | 1.6 |
Mechanical Data | Herunterladen |
Parameter
ADC | ADC10 - 6ch,SigmaDelta24 - 7ch |
AES | AES128 |
Active Power | 346.8 uA/MHz |
Additional Features | LCD,Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset,IrDA |
BSL | UART |
CPU | MSP430 |
DMA | 3 |
Featured | f6 |
Frequency | 25 MHz |
GPIO Pins | 90 |
I2C | 2 |
Max VCC | 3.6 |
Min VCC | 1.8 |
Multiplier | 32x32 |
Non-volatile Memory | 512 KB |
Operating Temperature Range | -40 to 85 C |
Package Group | LQFP |
Package Size: mm2:W x L | 100LQFP: 256 mm2: 16 x 16(LQFP) PKG |
RAM | 32 KB |
Rating | Catalog |
SPI | 6 |
Special I/O | N/A |
Standby Power | 2.9 LPM3-uA |
Timers - 16-bit | 4 |
UART | 4 |
Wakeup Time | 5 us |
Öko-Plan
RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Development Kits: MSP-TS430PEU128
MSP-TS430PEU128 - 128-pin Target Development Board for MSP430F6x MCUs
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: EVM430-F6779
EVM430-F6779 - 3 Phase Electronic Watt-Hour EVM for Metering
Lifecycle Status: Active (Recommended for new designs) - Development Kits: MSP-FET430U128
128-pin Target Development Board and MSP-FET Programmer Bundle for MSP430F6x MCUs
Lifecycle Status: Active (Recommended for new designs) - JTAG Emulators/ Analyzers: ENERGYTRACE
MSP EnergyTrace Technology
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Implementation of a Three-Phase Electronic Watt-Hour Meter Using MSP430F677x(A) (Rev. G)PDF, 2.4 Mb, Revision: G, Datei veröffentlicht: Aug 5, 2015
This application report describes the implementation of a three-phase electronic electricity meter using the Texas Instruments MSP430F677x(A) metering processor. This application report includes the necessary information with regard to metrology software, hardware procedures for this single-chip implementation. - Using TI’s DLMS COSEM LibraryPDF, 74 Kb, Datei veröffentlicht: Nov 12, 2013
This application report describes in detail the usage of DLMS COSEM library developed by Texas Instruments for customers who use TI's microcontrollers in metering applications. The library is provided as object coded with a configuration file for ease of use. The library can be obtained by contacting the regional sales and marketing offices. The customer will have to sign an SLA before getting acc - Differences Between MSP430F67xx and MSP430F67xxA DevicesPDF, 3.5 Mb, Datei veröffentlicht: Mar 30, 2015
This application report describes the enhancements of the MSP430F67xxA devices from the non-A MSP430F67xx devices. In the course of this application report, the MSP430F67xx errata that are fixed in the MSP430F67xxA and the additional features added to the MSP430F67xxA devices are discussed. In addition, metrology results are compared to further show that the changes implemented in the MSP430F67xxA - Designing With MSP430 and Segment LCDs (Rev. A)PDF, 2.1 Mb, Revision: A, Datei veröffentlicht: Jul 20, 2015
Segment liquid crystal displays (LCDs) are needed to provide information to users in a wide variety of applications from smart meters to electronic shelf labels (ESL) to medical equipment. Several MSP430в„ў microcontroller families include built-in low-power LCD driver circuitry that allows the MSP430 MCU to directly control the segmented LCD glass. This application note helps explain how segmented - Migrating from the MSP430F5xx,F6xx Family to the MSP430FR58xx/FR59xx/68xx Family (Rev. D)PDF, 151 Kb, Revision: D, Datei veröffentlicht: Nov 3, 2016
This application report helps enable easy migration from MSP430F5xx and MSP430F6xx flash-based MCUs to the MSP430FR58xx/FR59xx/68xx/69xx FRAM-based MCUs. For the migration guide to MSP430FR57xx, see Migrating From the MSP430F2xx Family to the MSP430FR57xx Family. It covers programming, system, and peripheral considerations when migrating firmware. The intent is to highlight differences between the - General Oversampling of MSP ADCs for Higher Resolution (Rev. A)PDF, 551 Kb, Revision: A, Datei veröffentlicht: Apr 1, 2016
Multiple MSP ultra-low-power microcontrollers offer analog-to-digital converters (ADCs) to convert physical quantities into digital numbers, a function that is widely used across numerous applications. There are times, however, when a customer design demands a higher resolution than the ADC of the selected MSP can offer. This application report, which is based on the previously-published Oversampl - Design Considerations When Using the MSP430 Graphics LibraryPDF, 475 Kb, Datei veröffentlicht: Oct 5, 2012
LCDs are a growing commodity in todays market with products as diverse as children's toys to medical devices. Modern LCDs, along with the graphics displayed on them, are growing in complexity. A graphics library can simplify and accelerate development while creating the desired user experience. TI provides the MSP430 Graphics Library for use in developing products with the MSP430в„ў MCU. This
Modellreihe
Serie: MSP430F6779 (4)
- MSP430F6779IPEU MSP430F6779IPEUR MSP430F6779IPZ MSP430F6779IPZR
Herstellerklassifikation
- Semiconductors > Microcontrollers (MCU) > MSP430 ultra-low-power MCUs > MSP430F5x/6x