Datasheet Texas Instruments THS6092IDDAR — Datenblatt
| Hersteller | Texas Instruments |
| Serie | THS6092 |
| Artikelnummer | THS6092IDDAR |
275 mA, + 12 V ADSL CPE-Leitungstreiber 8-SO PowerPAD -40 bis 85
Datenblätter
200 mA +/- 12 V ADSL CPE Line Drivers datasheet
PDF, 1.2 Mb, Revision: C, Datei veröffentlicht: Oct 11, 2002
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 8 |
| Package Type | DDA |
| Industry STD Term | HSOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2500 |
| Carrier | LARGE T&R |
| Device Marking | 6092I |
| Width (mm) | 3.9 |
| Length (mm) | 4.89 |
| Thickness (mm) | 1.48 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.7 |
| Mechanical Data | Herunterladen |
Parameter
| Acl, min spec gain | 1 V/V |
| Additional Features | Shutdown |
| Architecture | Current FB |
| BW @ Acl | 100 MHz |
| CMRR(Min) | 55 dB |
| CMRR(Typ) | 63 dB |
| GBW(Typ) | 100 MHz |
| Input Bias Current(Max) | 10000000 pA |
| Iq per channel(Max) | 9.5 mA |
| Iq per channel(Typ) | 7.3 mA |
| Number of Channels | 2 |
| Offset Drift(Typ) | 20 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 275 mA |
| Package Group | SO PowerPAD |
| Package Size: mm2:W x L | 8SO PowerPAD: 29 mm2: 6 x 4.9(SO PowerPAD) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 600 V/us |
| Total Supply Voltage(Max) | 14 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 5 +5V=5, +/-5V=10 |
| Vn at Flatband(Typ) | 2.1 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 16 mV |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: THS6092EVM
THS6092 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revision: A, Datei veröffentlicht: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Modellreihe
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)