Datasheet Texas Instruments TPA3110D2QPWPRQ1 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | TPA3110D2-Q1 |
| Artikelnummer | TPA3110D2QPWPRQ1 |
15-W-Filter-Klasse-D-Stereoverstärker für Kraftfahrzeuge mit SpeakerGuardT 28-HTSSOP -40 bis 125
Datenblätter
TPA3110D2-Q1 15-W Filter-Free Stereo Class-D Audio Power Amplifier With SpeakerGuardв„ў datasheet
PDF, 1.8 Mb, Revision: B, Datei veröffentlicht: Sep 9, 2015
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 28 |
| Package Type | PWP |
| Industry STD Term | HTSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2000 |
| Carrier | LARGE T&R |
| Device Marking | TPA3110Q1 |
| Width (mm) | 4.4 |
| Length (mm) | 9.7 |
| Thickness (mm) | 1 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Herunterladen |
Parameter
| Analog Supply (V) | 26 Min |
| Audio Input Type | Analog |
| Closed/Open Loop | Closed |
| Control Interface | Hardware |
| Operating Temperature Range | -40 to 125 C |
| Package Group | HTSSOP |
| Package Size: mm2:W x L | 28HTSSOP: 62 mm2: 6.4 x 9.7(HTSSOP) PKG |
| Power Stage Supply(Max) | 26 V |
| Power Stage Supply(Min) | 8 V |
| Power to Bridge Tied Load(Max) | 15 W |
| Rating | Automotive |
| Speaker Channels | 2 Max |
| Supported Bridge Tied Load(Min) | 4 Ohms |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: TPA3110D2EVM
TPA3110D2 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Short-to-Battery Protection Strategies for Class-D AmplifiersPDF, 3.2 Mb, Datei veröffentlicht: Nov 11, 2016
This document introduces the potential faults that can occur in class-D amplifier solutions, and describes how most faults are intrinsically protected for and how to extend coverage to protect against all short-circuit faults. Of particular focus is the case when an output is shorted to a battery voltage higher than the device supply voltage. This fault allows the parasitic body diode found in the - AN-1737 Managing EMI in Class D Audio Applications (Rev. A)PDF, 140 Kb, Revision: A, Datei veröffentlicht: May 1, 2013
Electromagnetic interference (EMI) is an unwanted disturbance caused in an electrical circuit byelectromagnetic radiation emitted from an external source. The disturbance may interrupt, obstruct, orotherwise degrade the effective performance of the circuit. - Using Thermal Calculation Tools for Analog ComponentsPDF, 1.1 Mb, Datei veröffentlicht: Sep 2, 2010
This document provides general guidance on the use of toolsand calculations for thermal estimates of component operating temperatures for analog devices. Of particularfocus are components with direct thermal paths to the PCB which is common for components which need a low thermal resistance to manage the dissipated power. This document provides practical considerations for estimation of o - AN-1849 An Audio Amplifier Power Supply Design (Rev. B)PDF, 1.9 Mb, Revision: B, Datei veröffentlicht: May 1, 2013
This application report provides design information for a power supply for use with our newest offering of high-performance, ultra high-fidelity audio amplifier input stage ICs. - Guidelines for Measuring Audio Power Amplifier PerformancePDF, 765 Kb, Datei veröffentlicht: Oct 30, 2001
This application note provides guidelines for measuring the date sheet parameters of Texas Instruments audio power amplifiers (APAs) using prefabricated evaluation modules (EVMs). The primary equipment used for the measurements consists of the System Two audio measurement system by Audio Precision , a digital multimeter (DMM), and a dc power supply.
Modellreihe
Serie: TPA3110D2-Q1 (1)
- TPA3110D2QPWPRQ1
Herstellerklassifikation
- Semiconductors > Audio > Mid-Power Audio Amplifiers (10-50W) > Analog Input Amplifiers