Datasheet Texas Instruments LMH6629MFE/NOPB — Datenblatt

HerstellerTexas Instruments
SerieLMH6629
ArtikelnummerLMH6629MFE/NOPB
Datasheet Texas Instruments LMH6629MFE/NOPB

Rauscharmer Hochgeschwindigkeits-Operationsverstärker mit Abschaltung 5-SOT-23 -40 bis 125

Datenblätter

LMH6629 Ultra-Low Noise, High-Speed Operational Amplifier with Shutdown datasheet
PDF, 9.2 Mb, Revision: I, Datei veröffentlicht: Dec 5, 2014
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Verpackung

Pin5
Package TypeDBV
Industry STD TermSOT-23
JEDEC CodeR-PDSO-G
Package QTY250
CarrierSMALL T&R
Device MarkingAE7A
Width (mm)1.6
Length (mm)2.9
Thickness (mm)1.2
Pitch (mm).95
Max Height (mm)1.45
Mechanical DataHerunterladen

Parameter

2nd Harmonic88 dBc
3rd Harmonic74 dBc
@ MHz1
Acl, min spec gain4 V/V
Additional FeaturesDecompensated
ArchitectureBipolar,Voltage FB
BW @ Acl900 MHz
CMRR(Min)82 dB
CMRR(Typ)87 dB
GBW(Typ)4000 MHz
Input Bias Current(Max)23000 pA
Iq per channel(Max)16.7 mA
Iq per channel(Typ)15.5 mA
Number of Channels1
Offset Drift(Typ)0.45 uV/C
Operating Temperature Range-40 to 125,-40 to 85 C
Output Current(Typ)250 mA
Package GroupSOT-23
Package Size: mm2:W x L5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG
Rail-to-RailNo
RatingCatalog
Slew Rate(Typ)1100 V/us
Total Supply Voltage(Max)5.5 +5V=5, +/-5V=10
Total Supply Voltage(Min)2.7 +5V=5, +/-5V=10
Vn at 1kHz(Typ)0.69 nV/rtHz
Vn at Flatband(Typ)0.69 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)0.78 mV

Öko-Plan

RoHSCompliant

Design Kits und Evaluierungsmodule

  • Evaluation Modules & Boards: LMH6629SDEVAL
    Evaluation Board for the LMH6629
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: LMH730316
    LMH730316 Evaluation Board for High-Speed Single Op Amp in the 5-/6-Pin SOT-23 Package
    Lifecycle Status: Active (Recommended for new designs)

Anwendungshinweise

  • AN-1604 Decompensated Operational Amplifiers (Rev. B)
    PDF, 206 Kb, Revision: B, Datei veröffentlicht: May 1, 2013
    This application report discusses the what, why, and where of decompensated op amps. This applicationreport also describes external compensation techniques, such as reducing loop gain, to stabilize op ampsoperated at gains less than the minimum stable gain specified in the datasheet. A comprehensivetreatment of input lead-lag compensation including examples is presented.
  • OA-14 Improving Amplifier Noise for High 3rd Intercept Amplifiers (Rev. F)
    PDF, 594 Kb, Revision: F, Datei veröffentlicht: May 1, 2013
    This application report discusses improving Amplifier Noise for High 3rd Intercept Amplifiers.
  • Transimpedance Amplifiers (TIA): Choosing the Best Amplifier for the job (Rev. A)
    PDF, 153 Kb, Revision: A, Datei veröffentlicht: May 16, 2017
    This application note is intended as a guide for the designer looking to amplify the small signal from a photodiode or avalanche diode so that it would be large enough for further processing (e.g. data acquisition) or to trigger some other event in a system. The challenge in doing so, as always, is to not degrade the signal such that it becomes indistinguishable from random noi
  • Considerations for High-Gain Multistage Designs
    PDF, 347 Kb, Datei veröffentlicht: May 13, 2013

Modellreihe

Herstellerklassifikation

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)