Datasheet Texas Instruments TLV1548IDB — Datenblatt

HerstellerTexas Instruments
SerieTLV1548
ArtikelnummerTLV1548IDB
Datasheet Texas Instruments TLV1548IDB

10-Bit 85 kSPS ADC Ser.

Datenblätter

Low-Voltage 10-Bit A-D Converters w/Serial Control and 4/8 Analog Inputs datasheet
PDF, 1.1 Mb, Revision: C, Datei veröffentlicht: Jan 21, 1999
Auszug aus dem Dokument

Preise

Detaillierte Beschreibung

Out, Pgrmable Pwr / Pwrdn / Conversion Rate, TMS320 DSP / SPI / QPSI-Kompat., 8 Ch. 20-SSOP

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Verpackung

Pin20
Package TypeDB
Industry STD TermSSOP
JEDEC CodeR-PDSO-G
Package QTY70
CarrierTUBE
Device MarkingTY1548
Width (mm)5.3
Length (mm)7.2
Thickness (mm)1.95
Pitch (mm).65
Max Height (mm)2
Mechanical DataHerunterladen

Parameter

# Input Channels8
Analog Voltage AVDD(Max)5.5 V
Analog Voltage AVDD(Min)2.7 V
ArchitectureSAR
Digital Supply(Max)5.5 V
Digital Supply(Min)2.7 V
INL(Max)1 +/-LSB
Input Range(Max)5.5 V
Input TypeSingle-Ended
Integrated FeaturesN/A
InterfaceSPI
Multi-Channel ConfigurationMultiplexed
Operating Temperature Range-40 to 85 C
Package GroupSSOP
Package Size: mm2:W x L20SSOP: 56 mm2: 7.8 x 7.2(SSOP) PKG
Power Consumption(Typ)1.75 mW
RatingCatalog
Reference ModeExt
Resolution10 Bits
Sample Rate (max)85kSPS SPS
Sample Rate(Max)0.085 MSPS

Öko-Plan

RoHSCompliant

Anwendungshinweise

  • Interfacing the TLV1544/1548 Analog Digital Converter to Digital Processors
    PDF, 266 Kb, Datei veröffentlicht: Aug 1, 1997
    This Application Report describes the hardware and software requirements for interfacing an A/D converter to a DSP and to a MCU. The 10-bit A/D converter TLV1544 (4 analog input channels) and the TLV1548 (8 analog input channels) from Texas Instruments have been used to develop such interface. Example software code has been written showing how to program the DSP and the MCU to control the A/D conv
  • Choosing an ADC and Op Amp for Minimum Offset
    PDF, 72 Kb, Datei veröffentlicht: Oct 28, 1999
    Designing a mixed-signal circuit containing analog and digital components can be a challenge to the development engineer. Requirements such as a low single-polarity supply voltage and a high degree of precision may conflict, and make the choice of components and the best circuit design difficult. This report discusses problems that arise in using operational amplifiers (op amps) for signal conditi
  • Determining Minimum Acquisition Times for SAR ADCs, part 1 (Rev. A)
    PDF, 227 Kb, Revision: A, Datei veröffentlicht: Nov 10, 2010
    This application report analyzes a simple method for calculating minimum acquisition times for successive-approximation register analog-to-digital converters (SAR ADCs). The input structure of the ADC is examined along with the driving circuit. The voltage on the sampling capacitor is then determined for the case when a step function is applied to the input of the driving circuit. Three different
  • Determining Minimum Acquisition Times for SAR ADCs, part 2
    PDF, 215 Kb, Datei veröffentlicht: Mar 17, 2011
    The input structure circuit of a successive-approximation register analog-to-digital converter (SAR ADC) incombination with the driving circuit forms a transfer function that can be used to determine minimum acquisition times for different types of applied input signals. This application report, which builds on Determining Minimum Acquisition Times for SAR ADCs When a Step Function is Applied to

Modellreihe

Herstellerklassifikation

  • Semiconductors > Data Converters > Analog-to-Digital Converters (ADCs) > Precision ADCs (<=10MSPS)