Datasheet Texas Instruments LMP7731MFX/NOPB — Datenblatt
| Hersteller | Texas Instruments |
| Serie | LMP7731 |
| Artikelnummer | LMP7731MFX/NOPB |
2,9 nV / sqrt (Hz) Rauscharmer, präziser RRIO-Verstärker 5-SOT-23 -40 bis 125
Datenblätter
LMP7731 2.9 nV/sqrt(Hz) Low Noise, Precision, RRIO Amplifier datasheet
PDF, 1.1 Mb, Revision: E, Datei veröffentlicht: Mar 27, 2013
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 5 |
| Package Type | DBV |
| Industry STD Term | SOT-23 |
| JEDEC Code | R-PDSO-G |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | AY3A |
| Width (mm) | 1.6 |
| Length (mm) | 2.9 |
| Thickness (mm) | 1.2 |
| Pitch (mm) | .95 |
| Max Height (mm) | 1.45 |
| Mechanical Data | Herunterladen |
Parameter
| Additional Features | N/A |
| Architecture | Bipolar |
| CMRR(Min) | 101 dB |
| CMRR(Typ) | 120 dB |
| GBW(Typ) | 22 MHz |
| Input Bias Current(Max) | 50000 pA |
| Iq per channel(Max) | 3 mA |
| Iq per channel(Typ) | 2.2 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 0.5 uV/C |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 47 mA |
| Package Group | SOT-23 |
| Package Size: mm2:W x L | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
| Rail-to-Rail | In,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 2.4 V/us |
| Total Supply Voltage(Max) | 5.5 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 1.8 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 2.9 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.5 mV |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: AFE2256EVM
AFE2256 Evaluation Module for 256-Channel Analog Front End for Digital X-Ray Flat Panel Detectors
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- AN-1873 DC Parameters (Rev. A)PDF, 91 Kb, Revision: A, Datei veröffentlicht: May 1, 2013
This application report discusses the DC parameters. - AN-1515 A Comprehensive Study of the Howland Current Pump (Rev. A)PDF, 165 Kb, Revision: A, Datei veröffentlicht: Apr 26, 2013
It is well known to analog experts that you can use the positive and negative inputs of an operationalamplifier to make a high-impedance current source (current pump) using a conventional operationalamplifier (op amp). This basic circuit can put out both + and - output current (or zero current) into variousloads. The theory is simple. But the practical problems involved are not so simple or
Modellreihe
Serie: LMP7731 (5)
- LMP7731MA/NOPB LMP7731MAX/NOPB LMP7731MF/NOPB LMP7731MFE/NOPB LMP7731MFX/NOPB
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps