Datasheet Texas Instruments OPA725AIDBVT — Datenblatt
| Hersteller | Texas Instruments |
| Serie | OPA725 |
| Artikelnummer | OPA725AIDBVT |
OPA725- und OPA726-Serie: Sehr rauscharmer, schneller 12-V-CMOS-Operationsverstärker 5-SOT-23 -40 bis 125
Datenblätter
OPA725 and OPA726 Series: Very Low-Noise, High-Speed, 12V CMOS Op Amp datasheet
PDF, 1.1 Mb, Revision: B, Datei veröffentlicht: Jan 8, 2004
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 5 |
| Package Type | DBV |
| Industry STD Term | SOT-23 |
| JEDEC Code | R-PDSO-G |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | OALI |
| Width (mm) | 1.6 |
| Length (mm) | 2.9 |
| Thickness (mm) | 1.2 |
| Pitch (mm) | .95 |
| Max Height (mm) | 1.45 |
| Mechanical Data | Herunterladen |
Parameter
| Additional Features | N/A |
| Architecture | CMOS |
| CMRR(Min) | 88 dB |
| CMRR(Typ) | 94 dB |
| GBW(Typ) | 20 MHz |
| Input Bias Current(Max) | 200 pA |
| Iq per channel(Max) | 5.5 mA |
| Iq per channel(Typ) | 4.3 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 4 uV/C |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 40 mA |
| Package Group | SOT-23 |
| Package Size: mm2:W x L | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
| Rail-to-Rail | In to V-,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 30 V/us |
| Total Supply Voltage(Max) | 12 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 4 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 10 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 3 mV |
Öko-Plan
| RoHS | Compliant |
Anwendungshinweise
- OPA725, OPA2725, OPA726, OPA2726 EMI Immunity Performance (Rev. A)PDF, 90 Kb, Revision: A, Datei veröffentlicht: Nov 2, 2012
- High-Voltage Signal Conditioning for Low Voltage ADCsPDF, 135 Kb, Datei veröffentlicht: Jun 15, 2004
Analog designers are frequently required to develop circuits that convert high-voltage signals to levels acceptable for low-voltage data converters. This paper describes several solutions for this common task using modern amplifiers and typical power supplies. Five examples of conditioning ±10V bipolar signals for low-voltage single-rail analog-to-digital converters(ADCs) are presented:
Modellreihe
Serie: OPA725 (7)
- OPA725AID OPA725AIDBVR OPA725AIDBVRG4 OPA725AIDBVT OPA725AIDBVTG4 OPA725AIDG4 OPA725AIDR
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps