Datasheet Texas Instruments 74ACT11257DW — Datenblatt

HerstellerTexas Instruments
Serie74ACT11257
Artikelnummer74ACT11257DW
Datasheet Texas Instruments 74ACT11257DW

Vierfache 2-Zeilen- bis 1-Zeilen-Datenauswahl / Multiplexer mit 3-Zustands-Ausgängen 20-SOIC -40 bis 85

Datenblätter

Quadruple 2-Line To 1-Line Data Selector/Multiplexer With 3-State Outputs datasheet
PDF, 1.0 Mb, Revision: B, Datei veröffentlicht: Apr 1, 1996
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Verpackung

Pin20
Package TypeDW
Industry STD TermSOIC
JEDEC CodeR-PDSO-G
Package QTY25
CarrierTUBE
Device MarkingACT11257
Width (mm)7.5
Length (mm)12.8
Thickness (mm)2.35
Pitch (mm)1.27
Max Height (mm)2.65
Mechanical DataHerunterladen

Parameter

Bandwidth100 MHz
Bits2
Number of Channels4
Configuration2:1
Digital input leakage(Max)5 uA
ESD Charged Device Model0.75 kV
ESD HBM2 kV
F @ Nom Voltage(Max)90 Mhz
FunctionEncoder/Multiplexer
ICC @ Nom Voltage(Max)0.08 mA
Operating Temperature Range-40 to 85 C
Output Drive (IOL/IOH)(Max)24/-24 mA
Package GroupSOIC
Package Size: mm2:W x L20SOIC: 132 mm2: 10.3 x 12.8(SOIC) PKG
RatingCatalog
Schmitt TriggerNo
Technology FamilyACT
Type3-State Output
VCC(Max)5.5 V
VCC(Min)4.5 V
Voltage(Nom)5 V
tpd @ Nom Voltage(Max)8 ns

Öko-Plan

RoHSCompliant

Anwendungshinweise

  • Selecting the Right Level Translation Solution (Rev. A)
    PDF, 313 Kb, Revision: A, Datei veröffentlicht: Jun 22, 2004
    Supply voltages continue to migrate to lower nodes to support today's low-power high-performance applications. While some devices are capable of running at lower supply nodes others might not have this capability. To haveswitching compatibility between these devices the output of each driver must be compliant with the input of the receiver that it is driving. There are several level-translati
  • TI IBIS File Creation Validation and Distribution Processes
    PDF, 380 Kb, Datei veröffentlicht: Aug 29, 2002
    The Input/Output Buffer Information Specification (IBIS) also known as ANSI/EIA-656 has become widely accepted among electronic design automation (EDA) vendors semiconductor vendors and system designers as the format for digital electrical interface data. Because IBIS models do not reveal proprietary internal processes or architectural information semiconductor vendors? support for IBIS con
  • Understanding and Interpreting Standard-Logic Data Sheets (Rev. C)
    PDF, 614 Kb, Revision: C, Datei veröffentlicht: Dec 2, 2015
  • Semiconductor Packing Material Electrostatic Discharge (ESD) Protection
    PDF, 337 Kb, Datei veröffentlicht: Jul 8, 2004
    Forty-eight-pin TSSOP components that were packaged using Texas Instruments (TI) standard packing methodology were subjected to electrical discharges between 0.5 and 20 kV as generated by an IEC ESD simulator to determine the level of ISD protection provided by the packing materials. The testing included trays tape and reel and magazines. Additional units were subjected to the same discharge
  • Introduction to Logic
    PDF, 93 Kb, Datei veröffentlicht: Apr 30, 2015
  • Implications of Slow or Floating CMOS Inputs (Rev. D)
    PDF, 260 Kb, Revision: D, Datei veröffentlicht: Jun 23, 2016
  • CMOS Power Consumption and CPD Calculation (Rev. B)
    PDF, 89 Kb, Revision: B, Datei veröffentlicht: Jun 1, 1997
    Reduction of power consumption makes a device more reliable. The need for devices that consume a minimum amount of power was a major driving force behind the development of CMOS technologies. As a result CMOS devices are best known for low power consumption. However for minimizing the power requirements of a board or a system simply knowing that CMOS devices may use less power than equivale
  • Designing With Logic (Rev. C)
    PDF, 186 Kb, Revision: C, Datei veröffentlicht: Jun 1, 1997
    Data sheets which usually give information on device behavior only under recommended operating conditions may only partially answer engineering questions that arise during the development of systems using logic devices. However information is frequently needed regarding the behavior of the device outside the conditions in the data sheet. Such questions might be:?How does a bus driver behave w
  • Using High Speed CMOS and Advanced CMOS in Systems With Multiple Vcc
    PDF, 43 Kb, Datei veröffentlicht: Apr 1, 1996
    Though low power consumption is a feature of CMOS devices sometimes this feature does not meet a designer?s system power supply constraints. Therefore a partial system power down or multiple Vcc supplies are used to meet the needs of the system. This document shows electrostatic discharge protection circuits. It also provides circuit and bus driver examples of partial system power down and curren

Modellreihe

Serie: 74ACT11257 (3)

Herstellerklassifikation

  • Semiconductors > Switches and Multiplexers > Buffered Encoders and Decoders