Datasheet Texas Instruments TPS61132PWRG4 — Datenblatt

HerstellerTexas Instruments
SerieTPS61132
ArtikelnummerTPS61132PWRG4
Datasheet Texas Instruments TPS61132PWRG4

3,3 V, 90% effizienter SEPIC-Wandler mit 1,5 V, 200 mA LDO für 1-Zellen-LiIon- oder Dual-Cell-Anwendungen 16-TSSOP -40 bis 85

Datenblätter

TPS6113x Synchronous SEPIC and Flyback Converter With 1.1-A Switch and Integrated LDO datasheet
PDF, 1.2 Mb, Revision: C, Datei veröffentlicht: Sep 29, 2015
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusObsolete (Manufacturer has discontinued the production of the device)
Manufacture's Sample AvailabilityNo

Verpackung

Pin16
Package TypePW
Industry STD TermTSSOP
JEDEC CodeR-PDSO-G
Width (mm)4.4
Length (mm)5
Thickness (mm)1
Pitch (mm).65
Max Height (mm)1.2
Mechanical DataHerunterladen

Parameter

Approx. Price (US$)2.00 | 1ku
Duty Cycle(Max)(%)100
Iq(Typ)(mA)0.04
Operating Temperature Range(C)-40 to 85
Package GroupTSSOP
RatingCatalog
Regulated Outputs(#)2
Special FeaturesEnable
Light Load Efficiency
Load Disconnect
Power Good
Switch Current Limit(Min)(A)1.1
Switch Current Limit(Typ)(A)1.3
Switching Frequency(Max)(kHz)600
Switching Frequency(Min)(kHz)400
TypeConverter
Vin(Max)(V)5.5
Vin(Min)(V)1.8
Vout(Max)(V)3.3
Vout(Min)(V)3.3

Öko-Plan

RoHSNot Compliant
Pb FreeNo

Design Kits und Evaluierungsmodule

  • Evaluation Modules & Boards: TPS61130EVM-206
    TPS61130 Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

Anwendungshinweise

  • Minimizing Ringing at the Switch Node of a Boost Converter
    PDF, 201 Kb, Datei veröffentlicht: Sep 15, 2006
    The application report explains how to use proper board layout and/or a snubber to reduce high-frequency ringing at the switch node of a boost converter.
  • Basic Calculation of a Boost Converter's Power Stage (Rev. C)
    PDF, 186 Kb, Revision: C, Datei veröffentlicht: Jan 8, 2014
    This application note gives the equations to calculate the power stage of a boost converter built with an IC with integrated switch and operating in continuous conduction mode. It is not intended to give details on the functionality of a boost converter (see Reference 1) or how to compensate a converter. See the references at the end of this document if more detail is needed.
  • Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. A)
    PDF, 1.1 Mb, Revision: A, Datei veröffentlicht: May 11, 2015
  • Optimizing Resistor Dividers at a Comparator (Rev. A)
    PDF, 120 Kb, Revision: A, Datei veröffentlicht: Jun 3, 2013
  • Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs
    PDF, 130 Kb, Datei veröffentlicht: Sep 19, 2011
  • Extending the Soft Start Time Without a Soft Start Pin (Rev. B)
    PDF, 387 Kb, Revision: B, Datei veröffentlicht: Jun 15, 2017
  • QFN and SON PCB Attachment (Rev. B)
    PDF, 821 Kb, Revision: B, Datei veröffentlicht: Aug 24, 2018
  • IQ: What it is what it isn’t and how to use it
    PDF, 198 Kb, Datei veröffentlicht: Jun 17, 2011
  • Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
    PDF, 418 Kb, Revision: A, Datei veröffentlicht: Dec 11, 2018
    When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

Modellreihe

Serie: TPS61132 (2)

Herstellerklassifikation

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Converter (Integrated Switch)