Datasheet Texas Instruments LM324N — Datenblatt
| Hersteller | Texas Instruments |
| Serie | LM324 |
| Artikelnummer | LM324N |
Vierfach-Operationsverstärker 14-PDIP 0 bis 70
Datenblätter
Datasheet LM124, LM124A, LM124M, LM224, LM224A, LM224K, LM224KA, LM2902, LM2902K, LM2902KAV, LM2902KV, LM2902V, LM324, LM324A, LM324K, LM324KA
PDF, 1.8 Mb, Revision: W, Datei veröffentlicht: Mar 30, 2014, Seiten: 42
Quadruple Operational Amplifiers
Quadruple Operational Amplifiers
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 14 |
| Package Type | N |
| Industry STD Term | PDIP |
| JEDEC Code | R-PDIP-T |
| Package QTY | 25 |
| Carrier | TUBE |
| Device Marking | LM324N |
| Width (mm) | 6.35 |
| Length (mm) | 19.3 |
| Thickness (mm) | 3.9 |
| Pitch (mm) | 2.54 |
| Max Height (mm) | 5.08 |
| Mechanical Data | Herunterladen |
Parameter
| Additional Features | N/A |
| Architecture | Bipolar |
| CMRR(Min) | 65 dB |
| CMRR(Typ) | 80 dB |
| GBW(Typ) | 1.2 MHz |
| Input Bias Current(Max) | 250000 pA |
| Iq per channel(Max) | 0.3 mA |
| Iq per channel(Typ) | 0.175 mA |
| Number of Channels | 4 |
| Offset Drift(Typ) | 7 uV/C |
| Operating Temperature Range | 0 to 70 C |
| Output Current(Typ) | 40 mA |
| Package Group | PDIP |
| Package Size: mm2:W x L | See datasheet (PDIP) PKG |
| Rail-to-Rail | In to V- |
| Rating | Catalog |
| Slew Rate(Typ) | 0.5 V/us |
| Total Supply Voltage(Max) | 32 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 3 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 35 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 7 mV |
Öko-Plan
| RoHS | Compliant |
| Pb Free | Yes |
Anwendungshinweise
- AN-666 DTMF Generation with 3.58 MHz CrystalPDF, 798 Kb, Datei veröffentlicht: May 14, 2004
- Mounting of Surface Mount Components (Rev. B)PDF, 5.8 Mb, Revision: B, Datei veröffentlicht: Apr 23, 2013
Over the past few years, electronic products, and especially those which fall within the category ofConsumer Electronics, have been significantly reduced in physical size and weight. This documentprovides information about the techniques used to mount CSP size components. - Get More Power Out of Dual or Quad Op-AmpsPDF, 91 Kb, Datei veröffentlicht: Oct 2, 2002
- AN-C V/F Converter ICs Handle Frequency-to-Voltage Needs (Rev. B)PDF, 371 Kb, Revision: B, Datei veröffentlicht: Apr 23, 2013
Simplify your frequency-to-voltage (F/V) converter designs with versatile V/F ICs. Starting with a basicconverter circuit you can modify it to meet almost any application requirement. You can spare yourselfsome hard labor when designing F/V converters by using a voltage-to-frequency (V/F) IC in your designs.These ICs form the basis of a series of accurate yet economical F/V converters sui - AN-260 A 20-Bit (1 ppm) Linear Slope-Integrating A/D Converter (Rev. B)PDF, 502 Kb, Revision: B, Datei veröffentlicht: May 5, 2013
This application report discusses how combining an “inferior”, 20 year old A/D conversion technique with amicroprocessor, a developmental A/D converter achieves 1 part-per-million (20-bit) linearity. - AN-30 Log Converters (Rev. B)PDF, 370 Kb, Revision: B, Datei veröffentlicht: May 1, 2013
One of the most predictable non-linear elements commonly available is the bipolar transistor. Therelationship between collector current and emitter base voltage is precisely logarithmic from currentsbelow one picoamp to currents above one milliamp. Using a matched pair of transistors and integratedcircuit operational amplifiers it is relatively easy to construct a linear to logarithmic conv - AN-278 Designing with a New Super Fast Dual Norton Amplifier (Rev. B)PDF, 867 Kb, Revision: B, Datei veröffentlicht: Apr 23, 2013
This application note provides new design ideas and discusses the positive impact of designing with theDual Norton amplifier. - AN-79 IC Preamplifier Challenges Choppers on Drift (Rev. B)PDF, 940 Kb, Revision: B, Datei veröffentlicht: May 1, 2013
Since the introduction of monolithic IC amplifiers there has been a continual improvement in DC accuracy.Bias currents have been decreased by 5 orders of magnitude over the past 5 years. Low offset voltagedrift is also necessary in a high accuracy circuits. This is evidenced by the popularity of low drift amplifiertypes as well as the requests for selected low-drift op amps. However until n - Audio Applications of Linear Integrated CircuitsPDF, 272 Kb, Datei veröffentlicht: May 2, 2004
- AN-262 Applying Dual and Quad FET Op Amps (Rev. B)PDF, 1.1 Mb, Revision: B, Datei veröffentlicht: May 6, 2013
The availability of dual and quad packaged FET op amps offers the designer all the traditional capabilitiesof FET op amps including low bias current and speed and some additional advantages. The cost-peramplifieris lower because of reduced package costs. This means that more amplifiers are available toimplement a function at a given cost making design easier. At the same time the availab - AN-263 Sine Wave Generation Techniques (Rev. C)PDF, 747 Kb, Revision: C, Datei veröffentlicht: Apr 22, 2013
This application note describes the sine wave generation techniques to control frequency amplitude anddistortion levels. - AN-256 Circuitry for Inexpensive Relative Humidity Measurement (Rev. B)PDF, 262 Kb, Revision: B, Datei veröffentlicht: May 6, 2013
Of all common environmental parameters humidity is perhaps the least understood and most difficult tomeasure. The most common electronic humidity detection methods albeit highly accurate are not obviousand tend to be expensive and complex (See Box). Accurate humidity measurement is vital to a number ofdiverse areas including food processing paper and lumber production pollution monitor - AN-1515 A Comprehensive Study of the Howland Current Pump (Rev. A)PDF, 165 Kb, Revision: A, Datei veröffentlicht: Apr 26, 2013
It is well known to analog experts that you can use the positive and negative inputs of an operationalamplifier to make a high-impedance current source (current pump) using a conventional operationalamplifier (op amp). This basic circuit can put out both + and - output current (or zero current) into variousloads. The theory is simple. But the practical problems involved are not so simple or - Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B)PDF, 81.7 Mb, Revision: B, Datei veröffentlicht: Apr 22, 2013
This application report discusses the effect of heavy loads on the accuracy and linearity of operationalamplifier circuits.
Modellreihe
Serie: LM324 (22)
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps