Datasheet Texas Instruments LM2902N — Datenblatt

HerstellerTexas Instruments
SerieLM2902
ArtikelnummerLM2902N
Datasheet Texas Instruments LM2902N

Vierfacher Operationsverstärker 14-PDIP -40 bis 125

Datenblätter

Datasheet LM124, LM124A, LM124M, LM224, LM224A, LM224K, LM224KA, LM2902, LM2902K, LM2902KAV, LM2902KV, LM2902V, LM324, LM324A, LM324K, LM324KA
PDF, 1.8 Mb, Revision: W, Datei veröffentlicht: Mar 30, 2014, Seiten: 42
Quadruple Operational Amplifiers
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Verpackung

Pin14
Package TypeN
Industry STD TermPDIP
JEDEC CodeR-PDIP-T
Package QTY25
CarrierTUBE
Device MarkingLM2902N
Width (mm)6.35
Length (mm)19.3
Thickness (mm)3.9
Pitch (mm)2.54
Max Height (mm)5.08
Mechanical DataHerunterladen

Parameter

Additional FeaturesN/A
ArchitectureBipolar
CMRR(Min)50 dB
CMRR(Typ)80 dB
GBW(Typ)1.2 MHz
Input Bias Current(Max)250000 pA
Iq per channel(Max)0.3 mA
Iq per channel(Typ)0.175 mA
Number of Channels4
Offset Drift(Typ)7 uV/C
Operating Temperature Range-40 to 125 C
Output Current(Typ)40 mA
Package GroupPDIP
Package Size: mm2:W x LSee datasheet (PDIP) PKG
Rail-to-RailIn to V-
RatingCatalog
Slew Rate(Typ)0.5 V/us
Total Supply Voltage(Max)26 +5V=5, +/-5V=10
Total Supply Voltage(Min)3 +5V=5, +/-5V=10
Vn at 1kHz(Typ)35 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)7 mV

Öko-Plan

RoHSCompliant
Pb FreeYes

Anwendungshinweise

  • Design of a Low Cost, 45W Flasher with Short Circuit Protection
    PDF, 548 Kb, Datei veröffentlicht: Apr 19, 2014
  • AN-1237 RSDSв„ў Flat Panel Display Design Guidelines Part 2 (Rev. A)
    PDF, 194 Kb, Revision: A, Datei veröffentlicht: May 6, 2013
    This application report presents part 2 of the flat panel display design guidelines.
  • AN-1234 RSDSв„ў Flat Panel Display Design Guidelines Part 1 (Rev. A)
    PDF, 245 Kb, Revision: A, Datei veröffentlicht: May 6, 2013
    This application report outlines the total system solution that Texas Instruments provides for flat panel displays (FPDs). The described design uses an reduced swing differential signaling (RSDS) interface technology for reduced power, reduced board size, reduced component count, and reduced EMI. This document is currently applicable to XGA and SXGA notebook and monitor applications.

Modellreihe

Herstellerklassifikation

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps