Datasheet Texas Instruments OPA836IDBVT — Datenblatt
| Hersteller | Texas Instruments |
| Serie | OPA836 |
| Artikelnummer | OPA836IDBVT |
Sehr geringe Leistung, Rail-to-Rail-Ausgang, Negative Rail-Eingang, VFB-Operationsverstärker 6-SOT-23 -40 bis 125
Datenblätter
OPAx836 Very-Low-Power, Rail-to-Rail Out, Negative Rail In, Voltage-Feedback Operational Amplifiers datasheet
PDF, 2.2 Mb, Revision: I, Datei veröffentlicht: Oct 31, 2016
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 6 |
| Package Type | DBV |
| Industry STD Term | SOT-23 |
| JEDEC Code | R-PDSO-G |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | QTL |
| Width (mm) | 1.6 |
| Length (mm) | 2.9 |
| Thickness (mm) | 1.2 |
| Pitch (mm) | .95 |
| Max Height (mm) | 1.45 |
| Mechanical Data | Herunterladen |
Parameter
| 2nd Harmonic | 85 dBc |
| 3rd Harmonic | 79 dBc |
| @ MHz | 1 |
| Acl, min spec gain | 1 V/V |
| Additional Features | Shutdown |
| Architecture | Bipolar,Voltage FB |
| BW @ Acl | 205 MHz |
| CMRR(Min) | 94 dB |
| CMRR(Typ) | 116 dB |
| GBW(Typ) | 120 MHz |
| Input Bias Current(Max) | 1000000 pA |
| Iq per channel(Max) | 1.2 mA |
| Iq per channel(Typ) | 1 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 1.1 uV/C |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 50 mA |
| Package Group | SOT-23 |
| Package Size: mm2:W x L | 6SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
| Rail-to-Rail | In to V-,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 560 V/us |
| Total Supply Voltage(Max) | 5.5 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.5 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 4.6 nV/rtHz |
| Vn at Flatband(Typ) | 4.6 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.4 mV |
Öko-Plan
| RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: OPA2836IDGSEVM
OPA2836 Evaluation Module for VSSOP/MSOP Package
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: OPA836IDBVEVM
OPA836 in DBV package EVM
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: OPA2835IDGSEVM
OPA2835 Evaluation Module for VSSOP/MSOP Package
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: ADS7945EVM-PDK
ADS7945 Performance Demonstration Kit
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: ADS7056EVM-PDK
ADS7056 Ultra-Low-Power Ultra-Small-Size 14-Bit 2.5MSPS SAR ADC Performance Demonstration Kit (PDK)
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- OPA836 Low-Power Op Amp ApplicationsPDF, 488 Kb, Datei veröffentlicht: Sep 8, 2011
- Low-Cost, Low-Power, Small 14-bit AFE: Interleaved ADCs Scalable up to 7.5 MSPSPDF, 1.3 Mb, Datei veröffentlicht: May 26, 2017
- Voltage Feedback vs. Current Feedback Op AmpsPDF, 93 Kb, Datei veröffentlicht: Nov 30, 1998
This application report contrasts and compares the characteristics and capabilities of voltage and current feedback operational amplifiers. The report also points out the many similarities between the two versions. - Designing for low distortion with high-speed op ampsPDF, 277 Kb, Datei veröffentlicht: Mar 2, 2005
- Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revision: A, Datei veröffentlicht: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Modellreihe
Serie: OPA836 (4)
- OPA836IDBVR OPA836IDBVT OPA836IRUNR OPA836IRUNT
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)